Financing 1 / 11
Item Specifications
Category
Condition
Used
Item Number
#1989
Make
deere
Model
624J
Year
2004
Industry
construction
Equipment Type
wheel loaders
Location
Poteau, OK
Also Available In
OK
Item Description
Powered by a reliable John Deere PowerTech engine and designed for optimal fuel efficiency and fast cycle times, this enclosed cab 2005 John Deere 624J wheel loader delivers exceptional material handling, grading, and loading performance for demanding job site applications.
Specifications
General
| Year | 2004 |
| Make | deere |
| Model | 624J |
| Hours | 12592 |
| Condition | Used |
| Net Peak Power | 180 hp (129 kW) @ 1,800 rpm |
| Net Rated Power | 165 hp (119 kW) @ 2,200 rpm |
| Aspiration | turbocharged, charge air cooled |
| Batteries (two 12 volt) | 950 CCA |
| Final Drives | heavy-duty inboard planetary |
| Steering Type | power, fully hydraulic |
| Articulation Angle | 80-degree arc (40 degrees each direction) |
Engine & Powertrain
| Type (Engine) | John Deere PowerTech 6068H; certified to EPA Tier 2 emissions |
| Cylinders | 6 |
| Displacement | 414 cu. in. (6.8 L) |
| Net Peak Torque | 605 lb.-ft. (810 Nm) @ 1,000 rpm |
| Electrical System | 24 volt with 80-amp alternator |
| Transmission Type | countershaft-type power shift |
| Fuel Tank (with ground-level fueling) | 92 gal. (348 L) |
Working Range
| Pump (loader and steering) | variable-displacement, axial-piston pump; closed-center, pressure-compensating system |
| Maximum Flow @ 2,350 rpm | 58 gpm (220 L/m) @ 1,000 psi (6895 kPa) |
| Pressure (loader and steering relief) | loader and steering relief 3,600 psi (24 850 kPa) |
| Steering Pressure | 3,600 psi (24 850 kPa) relief |
Undercarriage & Attachments
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Capacity, Heaped SAE | 3.5 cu. yd. (2.7 m3) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Capacity, Struck SAE | 3.0 cu. yd. (2.3 m3) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Breakout Force, SAE J732C | 28,483 lb. (12 920 kg) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Tipping Load, Straight | 25,639 lb. (11 630 kg) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Tipping Load, 40-Degree Full Turn, SAE | 21,854 lb. (9913 kg) |
Dimensions
| Turning Radius (measured to centerline of outside tire) | 17 ft. 0 in. (5187 mm) |
| Height to Hinge Pin, Fully Raised (Standard Z-Bar) | 13 ft. 0 in. (3966 mm) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Bucket Weight | 2,630 lb. (1193 kg) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Bucket Width | 105.9 in. (2690 mm) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Reach, 45-Degree Dump, 7-ft. (2.13 m) Clearance | 62.4in. (1585 mm) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Reach, 45-Degree Dump, Full Height | 40.6 in. (1031 mm) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Dump Clearance, 45 Degree, Full Height | 113 in. (2885 mm) |
| Standard Z-Bar w/Pin-On Bucket (GP w/Bolt-On Edge), Overall Length, Bucket on Ground | 24 ft. 10 in. (7572 mm) |
2004 Deere 624J Wheel Loader
BUY NOW OR MAKE OFFERAvailable