Financing 1 / 20
Item Specifications
Category
Condition
Used
Item Number
#1984
Make
caterpillar
Model
140M
Year
2009
Industry
construction
Equipment Type
motor graders
Location
Poteau, OK
Also Available In
OK
Item Description
Seller states machine has a hole in the block
Specifications
General
| Year | 2009 |
| Make | caterpillar |
| Model | 140M |
| Condition | Used |
| Base Power (1st gear) - Net | 144 kW 193 hp |
| VHP Plus - gear 1F, Net | 144 kW 193 hp |
| VHP Plus - gear 2F, Net | 151 kW 203 hp |
| VHP Plus - gear 3F, Net | 159 kW 213 hp |
| VHP Plus - gear 4F, Net | 166 kW 223 hp |
| VHP Plus - gear 5F, Net | 170 kW 228 hp |
| VHP Plus - gear 6F, Net | 174 kW 233 hp |
| VHP Plus - gear 7F, Net | 177 kW 238 hp |
| VHP Plus - gear 8F, Net | 181 kW 243 hp |
| VHP Plus range - Net | 144-181 kW 193-243 hp |
| AWD range - Net | 151-196 kW 202-263 hp |
| Bore | 115 mm 4.5 in |
| Stroke | 149 mm 5.9 in |
| Derating altitude | 3048 m 10,000 ft |
| Standard Capability | 43° C 109° F |
| Hi Ambient Capability | 50° C 122° F |
| Steering range - left/right | 47.5° |
| Articulation angle - left/right | 20° |
| Forward/Reverse Gears | 8 Fwd/6 Rev |
| Brakes Service | Multiple Oil Disc |
| Brakes Service, surface area | 23 000 cm2 3,565 in2 |
| Brakes Parking | Multiple Oil Disc |
| Brakes Secondary | Dual Circuit |
| Trans./Diff./Final Drives | 65 L 17.2 gal |
| Tandem housing (each) | 64 L 16.9 gal |
| Front wheel spindle bearing housing | 0.5 L 0.13 gal |
| Circle drive housing | 7 L 1.8 gal |
| Tandems Sidewall thickness Inner | 16 mm 0.63 in |
| Tandems Sidewall thickness Outer | 18 mm 0.71 in |
| Drive chain pitch | 50.8 mm 2 in |
| Tandem oscillation Front up | 15° |
| Tandem oscillation Front down | 25° |
| Moldboard Thickness | 22 mm 0.87 in |
| Moldboard Arc radius | 413 mm 16.3 in |
| Circle Diameter | 1530 mm 60.2 in |
| Cutting edge Thickness | 16 mm 0.6 in |
| End Bit Thickness | 16 mm 0.6 in |
| Frame Thickness | 12.7 mm 0.5 in |
| Front-top/bottom plate Thickness | 22 mm 0.87 in |
| Circle centershift Right | 728 mm 28.7 in |
| Circle centershift Left | 695 mm 27.4 in |
| Moldboard sideshift Right | 660 mm 26 in |
| Moldboard sideshift Left | 510 mm 20.1 in |
| Maximum depth of cut | 715 mm 28.1 in |
| Ripping depth, maximum | 426 mm 16.8 in |
| Penetration force | 9386 kg 20,693 lb |
| Pryout force | 12 544 kg 27,655 lb |
Engine & Powertrain
| Engine Model | Cat® C9.3 ACERT™ |
| Emissions | U.S. Tier 4 Interim/EU Stage IIIB |
| Displacement | 9.3 L 567.5 in3 |
| Torque rise | 50% |
| Max torque | 1247 N·m 920 lb ft |
| Number of cylinders | 6 |
| Transmission | Direct Drive, Powershift |
| Fuel Capacity | 416 L 110 gal |
| Cooling system | 56 L 14.8 gal |
| Engine Oil | 30 L 7.9 gal |
| Wheel axle spacing | 1522.8 mm 59.95 in |
| Front axle Wheel lean, left/right | 18° |
| Front axle - total oscillation per side | 32° |
Working Range
| Speed @ rated power | 2,100 rpm |
| Hydraulic System Circuit type | Parallel |
| Hydraulic Pump type | Variable Piston |
| Hydraulic Maximum system pressure | 24 150 kPa 3,500 psi |
| Hydraulic Reservoir tank capacity | 60 L 15.85 gal |
| Hydraulic Standby Pressure | 4200 kPa 609 psi |
| Top Speed Fwd. | 46.6 km/h 29.0 mph |
| Top Speed Rev. | 36.8 km/h 22.9 mph |
| Hydraulic system Total | 100 L 26.4 gal |
| Hydraulic system Tank | 64 L 16.9 gal |
| Maximum lift above ground | 480 mm 18.9 in |
Undercarriage & Attachments
| Circle Blade beam thickness | 40 mm 1.6 in |
| Blade Pull Base GVW | 11 687 kg 25,765 lb |
| Blade Pull Max GVW | 15 455 kg 34,072 lb |
| Blade Down Pressure Base GVW | 7423 kg 16,365 lb |
| Blade Down Pressure Max GVW | 13 243 kg 29,196 lb |
| Maximum blade position angle | 90° |
| Blade tip range Forward | 40° |
| Blade tip range Backward | 5° |
| Maximum shoulder reach outside of tires Right | 1978 mm 77.87 in |
| Maximum shoulder reach outside of tires Left | 1790 mm 70.5 in |
| Ripper shank holders | 5 |
| Ripper shank holder spacing | 533 mm 21 in |
Dimensions
| Turning radius, outside front tires | 7.6 m 24 ft 10 in |
| Tandems Height | 506 mm 19.9 in |
| Tandems Width | 210 mm 8.3 in |
| Blade width (Moldboard) | 3.7 m 12 ft |
| Moldboard Height | 610 mm 24 in |
| Moldboard Throat clearance | 166 mm 6.5 in |
| Drawbar Height | 152 mm 6 in |
| Drawbar Width | 76.2 mm 3 in |
| Cutting edge Width | 152 mm 6 in |
| End Bit Width | 152 mm 6 in |
| Front-top/bottom plate Width | 305 mm 12.0 in |
| Front frame structure Height | 321 mm 12.6 in |
| Front frame structure Width | 255 mm 10 in |
| Front axle Height to center | 600 mm 23.6 in |
| Machine length increase, beam raised | 1031 mm 40.6 in |
2009 Caterpillar 140M2 Motor Grader
BUY NOW OR MAKE OFFERAvailable