Financing Category
Condition
Used
Item Number
#1449
Make
multiquip
Model
dca40ssku4f2
Year
2020
Industry
electrical
Equipment Type
generators
Location
Dickinson, TX
Serial
92*****
Hours
202
Also Available In
| Year | 2020 |
| Make | multiquip |
| Model | dca40ssku4f2 |
| Hours | 202 |
| Serial Number | 92***** |
| Condition | Used |
| Armature Connection | Star with Neutral |
| Armature Connection (alternate) | Zig Zag |
| Phase (Star with Neutral) | 3 |
| Phase (Zig Zag) | Single |
| Standby Output (Star with Neutral) | 30.2 KW (37.8 KVA) |
| Standby Output (Zig Zag) | 27.3 KW |
| Prime Output (Star with Neutral) | 28.8 KW (36 KVA) |
| Prime Output (Zig Zag) | 26 KW |
| Voltage - 3Ø (Star with Neutral) | 208, 220, 240, 416, 440, 480 V |
| Voltage - 3Ø (Zig Zag) | N/A |
| Voltage - 1Ø (Star with Neutral) | N/A |
| Voltage - 1Ø (Zig Zag) | 120, 240 V |
| Power Factor (Star with Neutral) | 0.8 |
| Power Factor (Zig Zag) | 1 |
| Frequency | 60 Hz |
| No. of Poles | 4-pole |
| Excitation | Brushless with AVR |
| Frequency Regulation: Steady State | ±0.25% of mean value for constant loads from no load to full load. |
| Insulation | Class H |
| Make / Model | Kubota / V2403-CR-TIE4BG |
| Starting System | Electric |
| Bore x Stroke | 3.42 x 4.01 in. (87 x 102 mm) |
| BMEP | 145 psi (1000 kPa) |
| Compression Ratio | 16.0:1 |
| Maximum Inlet Restriction (Hg) | 8.86 in. (225 mm) |
| Gas Temperature | 918°F (492°C) |
| Heat Rejection to Coolant (per minute) | 1681 Btu (1.77 MJ) |
| Ambient Temperature Rating | 104°F (40°C) |
| Combustion Air | 88.3 cfm (2.5 m3/min) |
| Maximum Air Cleaner Restriction | 25 in. H2O (6.23 kPa) |
| 1Ø 120 Volt | 80 Amps (4 wire) 108 A x 2 (Zigzag) |
| 1Ø 240 Volt | 40 Amps (4 wire) 108 A (Zigzag) |
| 3Ø 240 Volt | 86 Amps |
| 3Ø 480 Volt | 43 Amps |
| Main Line Circuit Breaker Rating | 110 Amps |
| Over Current Relay Trip Set Point (480V Mode Only) | 43 Amps |
| Generator Design | Revolving field, self-ventilated Drip-proof, single bearing |
| Generator RPM | 1800 |
| Emissions | EPA Tier 4 Final Certified |
| Engine Design | 4-cycle, water cooled, direct injection, charge air cooled, EGR, ECM, and DOC |
| Displacement | 148.5 in3 (2434 cc) |
| No. cylinders | 4 |
| Gross Engine Power Output | 48.3 hp (36 kW) |
| Engine Speed | 1800 rpm |
| Battery | 12V 72Ah x 1 |
| Recommended Fuel | ASTM-D975-No.1 & No.2-D* |
| Maximum Fuel Flow (per hour) | 2.4 gallons (9.1 liters) |
| Fuel Tank Capacity | 67.4 gallons (255 liters) |
| Fuel Consumption at full load (gph) | 2.3 |
| Fuel Consumption at full load (lph) | 8.7 |
| Fuel Consumption at 3/4 load (gph) | 1.8 |
| Fuel Consumption at 3/4 load (lph) | 6.7 |
| Fuel Consumption at 1/2 load (gph) | 1.3 |
| Fuel Consumption at 1/2 load (lph) | 5.1 |
| Fuel Consumption at 1/4 load (gph) | 0.8 |
| Fuel Consumption at 1/4 load (lph) | 3.0 |
| Alternator Cooling Air | 526 cfm (14.9 m3/min) |
| Radiator Cooling Air | 1656 cfm (46.9 m3/min) |
| Voltage Regulation (No load to full load) | ±0.5% |
| Sound Level dB(A) Full load at 23 feet | 63 |
| Piston Speed | 1209 ft./min. (6.14 m/s) |
| Overspeed Limit | 2070 rpm |
| Oil Capacity | 2.5 gallons (9.7 liters) |
| Gas Flow (full load) | 155 cfm (4.4 m3/min) |
| Maximum Back Pressure | 26.9 in. H2O (6.7 kPa) |
| Fan Load | 0.62 hp (0.46 kW) |
| Coolant Capacity (with radiator) | 4.75 gallons (18 liters) |
| Coolant Flow Rate (per minute) | 17.7 gallons (67 liters) |
| Max. Lifting Point Capacity | 5,150 lbs. (2,315 kg) |
| Dry Weight | 2,205 lbs. (1000 kg) |
| Wet Weight | 2,735 lbs. (1,240 kg) |
Listing Price
BUY NOW OR MAKE OFFER
$35,000.00
Plus Buyer Fee ($3,500.00)
est. $580.05/mo
GET FINANCING